-
MODULES, SENSOR AND MODULES
NRF24L01 2.4GHz PA+LNA SMA Wireless Transceiver Module with Antenna
-
Frequency Range: 2.4GHz ISM Band (2400MHz – 2525MHz)
-
Operating Voltage: 3.3V DC
-
Communication Interface: SPI (up to 10 Mbps)
-
Transmit Power: Up to +20dBm with PA
-
Receive Sensitivity: -104dBm with LNA
-
Modulation: GFSK
SKU: GI0002 -
-
line follower
IR LINE FOLLOWING SENSOR MODULE, TCRT 5000, DIGITAL
- Operating Voltage: 3.5V-5V
- Supply Current: 15mA
- Optimal Sensing Distance: 3mm
- Designed with the reflected infrared sensor, indicator light.
- Built in a potentiometer for sensitivity control.
- On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L
- Signal detection sensitivity can adjust
- Reserve all the way more circuits (P3 voltage drawn)
SKU: GI0004 -
Drone GPS Modules
NEO-6M GPS Module
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- Super Sense Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
SKU: GI0006 -
Boost Converter, buck convereter
XL6009 MODULE DC-DC Step-Up Converter
- The performance is much higher than LM2577.
- Non-isolated Boost converter.
- It has a non-synchronous rectifier.
- Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range;
- Low ultra wide output voltage 5 v ~ 35 v
SKU: GI0007 -
Magnetometer & Gyroscope
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V.
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C).
- Peak current: 1.12mA.
- Operating Pressure: 300 hPa to 1100 hPa.
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m.
SKU: GI0008
-
MODULES, SENSOR AND MODULES
NRF24L01 2.4GHz PA+LNA SMA Wireless Transceiver Module with Antenna
-
Frequency Range: 2.4GHz ISM Band (2400MHz – 2525MHz)
-
Operating Voltage: 3.3V DC
-
Communication Interface: SPI (up to 10 Mbps)
-
Transmit Power: Up to +20dBm with PA
-
Receive Sensitivity: -104dBm with LNA
-
Modulation: GFSK
SKU: GI0002 -
-
line follower
IR LINE FOLLOWING SENSOR MODULE, TCRT 5000, DIGITAL
- Operating Voltage: 3.5V-5V
- Supply Current: 15mA
- Optimal Sensing Distance: 3mm
- Designed with the reflected infrared sensor, indicator light.
- Built in a potentiometer for sensitivity control.
- On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L
- Signal detection sensitivity can adjust
- Reserve all the way more circuits (P3 voltage drawn)
SKU: GI0004 -
Drone GPS Modules
NEO-6M GPS Module
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- Super Sense Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
SKU: GI0006 -
Boost Converter, buck convereter
XL6009 MODULE DC-DC Step-Up Converter
- The performance is much higher than LM2577.
- Non-isolated Boost converter.
- It has a non-synchronous rectifier.
- Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range;
- Low ultra wide output voltage 5 v ~ 35 v
SKU: GI0007 -
Magnetometer & Gyroscope
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V.
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C).
- Peak current: 1.12mA.
- Operating Pressure: 300 hPa to 1100 hPa.
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m.
SKU: GI0008
-
MODULES, SENSOR AND MODULES
NRF24L01 2.4GHz PA+LNA SMA Wireless Transceiver Module with Antenna
-
Frequency Range: 2.4GHz ISM Band (2400MHz – 2525MHz)
-
Operating Voltage: 3.3V DC
-
Communication Interface: SPI (up to 10 Mbps)
-
Transmit Power: Up to +20dBm with PA
-
Receive Sensitivity: -104dBm with LNA
-
Modulation: GFSK
SKU: GI0002 -
-
line follower
IR LINE FOLLOWING SENSOR MODULE, TCRT 5000, DIGITAL
- Operating Voltage: 3.5V-5V
- Supply Current: 15mA
- Optimal Sensing Distance: 3mm
- Designed with the reflected infrared sensor, indicator light.
- Built in a potentiometer for sensitivity control.
- On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L
- Signal detection sensitivity can adjust
- Reserve all the way more circuits (P3 voltage drawn)
SKU: GI0004 -
Drone GPS Modules
NEO-6M GPS Module
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- Super Sense Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
SKU: GI0006 -
Boost Converter, buck convereter
XL6009 MODULE DC-DC Step-Up Converter
- The performance is much higher than LM2577.
- Non-isolated Boost converter.
- It has a non-synchronous rectifier.
- Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range;
- Low ultra wide output voltage 5 v ~ 35 v
SKU: GI0007 -
Magnetometer & Gyroscope
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V.
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C).
- Peak current: 1.12mA.
- Operating Pressure: 300 hPa to 1100 hPa.
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m.
SKU: GI0008
Products Grid
Best Sellers
Recently Added
MODULES, SENSOR AND MODULES
NRF24L01 2.4GHz PA+LNA SMA Wireless Transceiver Module with Antenna
Frequency Range: 2.4GHz ISM Band (2400MHz – 2525MHz)
Operating Voltage: 3.3V DC
Communication Interface: SPI (up to 10 Mbps)
Transmit Power: Up to +20dBm with PA
Receive Sensitivity: -104dBm with LNA
Modulation: GFSK
SKU: GI0002
line follower
IR LINE FOLLOWING SENSOR MODULE, TCRT 5000, DIGITAL
Operating Voltage: 3.5V-5V
Supply Current: 15mA
Optimal Sensing Distance: 3mm
Designed with the reflected infrared sensor, indicator light.
Built in a potentiometer for sensitivity control.
On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L
Signal detection sensitivity can adjust
Reserve all the way more circuits (P3 voltage drawn)
SKU: GI0004
Drone GPS Modules
NEO-6M GPS Module
5Hz position update rate.
The cold start time of 38 s and Hot start time of 1 s.
Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
Super Sense Indoor GPS: -162 dBm tracking sensitivity.
Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
Separated 18 x 18mm GPS antenna.
SKU: GI0006
Boost Converter, buck convereter
XL6009 MODULE DC-DC Step-Up Converter
The performance is much higher than LM2577.
Non-isolated Boost converter.
It has a non-synchronous rectifier.
Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range;
Low ultra wide output voltage 5 v ~ 35 v
SKU: GI0007
Magnetometer & Gyroscope
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V.
Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C).
Peak current: 1.12mA.
Operating Pressure: 300 hPa to 1100 hPa.
Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m.
SKU: GI0008
Temperature & Humidity Sensor
W1209-50~100 DIGITAL TEMPARATURE CONTROLLER THERMOSTAT 12V
Temperature Control Range(°C): -50 to +110
Resolution @-9.9°C to +99.9°C: 0.1°C
Resolution @all temperatures: 1°C
Accuracy: 0.1°C
Refresh Rate(s): 0.5
Supply Voltage(V): 12
Measuring Inputs: NTC10K
Cable Length: 0.5 Meter
Output Type: 1 Channel Relay Output
Capacity: 10A
SKU: GI0009
GSM GPRS and GNSS Modules
SIM800L GPRS GSM MODULE MICRO SIM CORE BOARD QUAD-BAND PORT TTL FOR ARDUINO ( chip ending 1435/143n)
GSM GPRS and GNSS Modules
SIM800L GPRS GSM MODULE MICRO SIM CORE BOARD QUAD-BAND PORT TTL FOR ARDUINO ( chip ending 1435/143n)
Network support: Quad-Band 850/900/1800/1900 MHz – works on GSM networks in all countries across the world.
TTL serial interface compatible with 3.3V and 5V MCU
the small size is suitable for all kinds of sleeve belt type and embedded.
Power Interface: 2.54 mm Pin header or MICRO USB interface
SKU: GI0010
RFID Readers and Writers
PN532 NFC RFID Read / Write Module V3 Kit
Module Size: 42.7mm x 40.4mm x 4mm
Easy to change mode: with a small SMD toggle Switch, it becomes very easy to change among IIC, SPI and HSU modes
Longer distance: the reading distance becomes 5~7cm, compared with 4~6 cm of last version
Built in PCB Antenna, with 5cm~7cm communication distance
On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
Work as RFID reader/writer
Work as 1443-A card or a virtual card
SKU: GI0014
ESP BOARD, ESP WIFI Modules
NODEMCU CH340G
NODEMCU CH340G
Power input: 4.5V ~ 9V (10VMAX), USB-powered
Transfer rate: 110-460800bps
Support UART / GPIO data communication interface
Support Smart Link Smart Networking
Working temperature: -40°C ~ + 125°C
Drive Type: Dual high-power H-bridge
Don’t need to download resetting
A great set of tools to develop ESP8266
Flash size: 4MByte
Lowest cost WI-FI
SKU: GI0021
